Patel Shah & Co.

Depreciation Rates as per the Income Tax Act

The below depreciation rate chart is divided into two parts

  • Part A Tangible Assets
  • Part B Intangible Assets
Asset ClassSr. No.Asset TypeRate of Depreciation
Part A Tangible Assets
Building1.0Buildings used primarily for residential reasons (excluding boarding houses and hotels)5%
2.0Buildings apart from those used primarily for residential reasons and not covered by subitems 1 (above) and 3 (below)10%
3.0Buildings procured on or after September 1, 2002, for installing plant and machinery forming part of water treatment system or water supply project and which is used for the purpose of business of providing infrastructure facilities under clause (i) of subsection (4) of section 80-IA40%
4.0Purely temporary erections like wooden structures40%
Furniture and fittingsFurniture and fittings including electrical fittings10%
Plant and machinery1.0Plant and machinery excluding those covered by sub-items (2), (3) and (8) below15%
2.0Motor cars, excluding those used in a business of running them on hire, procured or put to use on or after April 1, 199015%
3.0Motor cars, other than those used in a business of running them on hire, acquired on or after the 23rd day of August, 2019 but before the 1st day of April, 2020 and is put to use before the 1st day of April, 2020.30%
3(i)Aeroplanes, Aero Engines40%
3(ii)(a) Motor taxis, motor buses and motor lorries used in a business of running them on hire30%
(b) Motor buses, motor lorries and motor taxis used in a business of running them on hire, acquired on or after the 23rd day of August, 2019 but before the 1st day of April, 2020 and is put to use before the 1st day of April, 2020.45%
3(iii)Commercial vehicle which is procured by the assessee on or after October 1, 1998, but before April 1, 1999, and is used for any period of time prior to April 1, 1999, for the purpose of profession or business in agreement with the third proviso to clause (ii) of sub-section (1) of section 3240%
3(iv)New commercial vehicle procured on or after October 1, 1998, but prior to April 1, 1999, in replacement of condemned vehicle of more than 15 years of age and is used for any period of time prior to April 1, 1999, for the purpose of business or profession in agreement with the third proviso to clause (ii) of sub-section (1) of section 3240%
3(v)New commercial vehicle procured on or after April 1, 1999, but before April 1, 2000, in replacement of condemned vehicle of more than 15 years of age and is put to use prior to April 1, 2000, for the purposes of profession or business in agreement with the second proviso to clause (ii) of sub-section (1) of section 3240%
3(vi)New commercial vehicle procured on or after April 1, 2001, but before April 1, 2002, and is put to use before April 1, 2002, for the purpose of profession or business40%
New commercial vehicle which is acquired on or after the 1st day of January, 2009 but before the 1st day of October, 2009 and is put to use before the 1st day of October, 2009 for the purposes of business or profession [See paragraph 6 of the Notes below this Table]40%
3(vii)Moulds used in plastic and rubber goods factories30%
3(viii)Air pollution control equipment40%
Felt-filer system
Electrostatic precipitation systems
Scrubber
Counter current / packed bed / venture / cyclonic scrubbers
Dust collector systems
Evacuation system and ash handling system
3(ix)Water pollution control equipment40%
Aerated detritus chambers (including air compressor)
Mechanical screen systems
Mechanically skimmed grease and oil removal systems
Flash mixing equipment and chemical feed systems
Mechanical reactors and mechanical flocculators
Mechanically aerated activated sludge / diffused air systems
Biofilters
Aerated lagoon systems
Air floatation systems
Methane
recovery anaerobic digester systems
Steam/air stripping systems
Marine outfall systems
Urea Hydrolysis systems
Activated carbon column
Bio
Disc or rotating biological contractor
Marine outfall systems
Ion exchange resin column
Centrifuge for dewatering sludge
3(x)(a) Solid waste, control equipment Cryolite / mineral / lime / caustic / chrome recovery system (b) Resource recovery and solid waste recycling systems40%
3(xi)Plant and machinery used in semiconductor industry covering all integrated circuits (ICs) (not including hybrid integrated circuits) ranging from small scale integration (SSI) to large scale integration / very large scale integration (LSI/VLSI) as also discrete semiconductor devices like diodes, triacs, thyristors, transistors, etc., except those covered by entries (viii), (ix), (x) of this sub-item and sub-item (8) below30%
3(xi)aLife Saving medical equipment40%
D.C Defibrillators for pacemakers and internal use
Colour Doppler
Haemodialysis
Cobalt therapy unit
Vascular Angiography System including Digital subtraction Angiography
Heart lung machine
Spect Gamma Camera
Magnetic Resonance Imaging System
Ventilator used with anaesthesia apparatus
Ventilator except those used with anaesthesia
Surgical laser
Gamma knife
Fibre optic endoscopes including audit resectoscope/paediatric resectoscope, arthoscope, peritoneoscopes, fibreoptic flexible nasal pharyngo, microaryngoscope, video laryngo, fiberoptic flexible laryngo bronchoscope.
Bronchoscope, video oescophago gastroscope, video oescopghago bronchoscope, fibreoptic flexible oesophago gastroscope
4.0Containers made of plastic or glass used as refills40%
5.0Computers including computer software40%
6.0Plant and machinery, used in processing, weaving and garment sector of textile industry, which is bought under TUFS on or after April 1, 2001, but prior to April 1, 2004, and is put to use prior to April 1, 200440%
7.0Plant and machinery procured and installed on or after September 1, 2002, in a water treatment system or a water supply project and put to use for the purpose of business of providing infrastructure facility under clause (i) of sub-section (4) of section 80-IA40%
8.01. Wooden parts used in artificial silk manufacturing machinery40%
2. Match factories, wooden match frames40%
3. Cinematograph films, bulbs of studio lights40%
4. Salt works, condensers, reservoirs, salt pans, etc., made of clayey, sandy or earthy material or any other similar material40%
5. Quarries and mines
Sand stowing pipes, winding ropes, tubs and haulage ropes40%
Safety lamps40%
6. Flour mills, rollers40%
7. Sugar works, rollers40%
8. Steel and iron industry, rolling mill rolls40%
9. Energy saving devices
(A) Furnaces and specialised boilers
(i) Fluidized bed boilers / ignifluid
(ii) Continuous pusher type furnaces and flameless furnaces
(iii) High efficiency boilers
(iv) Fluidized bed type heat treatment40%
(B) Instrumentation and monitoring system for monitoring energy flows
(i) Digital heat loss meters
(ii) Automatic electrical load monitoring systems
(iii) Infrared thermography40%
(iv) Microprocessor based control systems
(v) Meters for measuring heat losses, steam flow, furnace oil flow, power factor and electric energy meters
(vi) Exhaust gas analysers
(vii) Maximum demand indicator and clamp on power meters
(viii) Fuel oil pump test bench
(C) Waste heat recovery equipment
(i) Air pre-heaters and recuperators40%
(ii) Feed water heaters and economisers
(iii) Thermal energy wheel for low and high temperature heat recovery
(iv) Heat pumps
(D) Co-generation systems
(i) Controlled extraction, back pressure pass out, extraction cum condensing turbines for cogeneration along with pressure boilers40%
(ii) Organic rankine cycle power systems
(iii) Vapour absorption refrigeration systems
(iv) Low inlet pressure small steam turbines
(E) Electrical equipment
(i) Synchronous condenser systems and shunt capacitors
(ii) Relays (automatic power cut off devices)
(iii) Power factor controller for AC motors
(iv) Automatic voltage controller
(v) Solid state devices for controlling motor speeds
(vi) FACT (Flexible AC Transmission) devices, Thyristor controlled series compensation equipment40%
(vii) Thermally energy-efficient stenters
(viii) Series compensation equipment
(ix) TOD (Time of Day) energy meters
(x) Intelligent electronic devices/remote terminal units, computer software/hardware, bridges/router, other required equipment and associated communication systems for data acquisition systems and supervisory control, distribution management systems and energy management systems for power transmission systems
(xi) Special energy meters for ABT (Availability Based Tariff)
(F) Burners
(i) Zero to ten per cent excess air burners
(ii) Burners using air with high preheat temperature (above 300 degrees Celsius)
(iii) Emulsion burners40%
(G) Other equipment
(i) Mechanical vapour recompressors
(ii) Wet air oxidation equipment for recovery of heat and chemicals
(iii) Automatic microprocessor based load demand controllers40%
(iv) Thin film evaporators
(v) Fluid couplings and fluid drives
(vi) Coal based producer gas plants
(vii) Super-charges/turbo charges
(viii) Sealed radiation sources for radiation processing plants
10. Gas cylinders including regulators and valves40%
11. Glass manufacturing concerns, Direct fire glass melting furnaces40%
12. Mineral oil concerns40%
(i) Plant used in field operations (above ground) distribution, returnable packages
(ii) Plant used in field operations (below ground), but not including kerbside pumps including fittings and tanks used in field operations (distribution) by mineral oil concerns
(iii) Oil wells not covered in (i) and (ii) above15%
13. Renewable energy devices
(i) Pipe type and concentrating solar collectors
(ii) Flat plate solar collectors
(iii) Solar cookers
(iv) Air/fluid/gas heating systems
(v) Solar water heaters and systems
(vi) Solar crop drivers and systems
(vii) Solar steels and desalination systems
(viii) Solar refrigeration, air conditioning systems and cold storages
(ix) Solar pumps based on solar-photovoltaic and solar-thermal conversion40%
(x) Solar power generating systems
(xi) Solar-photovoltaic panels and modules for water pumping and other applications
14. Wind mills and any other specially designed devices that operate on wind mills (installed on or after April 1, 2014)
15. Any special devices including electric pumps and generators operating on wind energy (installed on or after April 1, 2014)
16. Books owned by assessees carrying on a profession
(i) Books, being annual publications40%
(ii) Books, excluding those covered by entry (i) above40%
(iii) Books owned by assessees carrying on business in running lending libraries40%
Ships4(i)Ocean-going ships including tugs, survey launches, dredgers, barges and other similar ships used primarily for dredging purposes and sighing vessels with wooden hull20%
4(ii)Vessels ordinarily operating on inland waters, not covered by sub-item (iii) below20%
4 (iii)Vessels ordinarily operating on inland waters being speed boats20%
Part B Intangible Assets
Franchise, trademark, patents, license, copyright, know-how or other commercial or business rights of similar nature25%